Compressed air filters, tasks and variations

In particular, after the oil spray can be used with this type of compressor filters and oil from the compressor can be kept a significant part. Thus, the oil product and can create problems in pneumatic circuits can be avoided. At the same time, the compressor oil from the compressed air line build up in time as well as lead to pollution, as well as cross section lead to narrowed, pressure has been switched to front-turn will create a loss.

Available for dust and oil filters, are presented as pre-filter and fine filter. Efficiency of filters depends on the compressed air temperature and productivity are usually compressed air temperature of 20 ◦ C is given for. Therefore, when the filter selection based on the circumstances under which the efficiency values should be viewed. Pre-filter dust and particles can be kept up to 1 micron. After this filter, compressed air is the amount of oil is up to 1 ppm.

Precision filters dust and particles up to the micron 0:01 after tutabilirler.Bu filters, compressed air is reduced to the level of 0.01 ppm in the amount of oil. This type of filter clogging caused by the loss of pressure indicators are showing. Pressure loss, even if max.düzeye out, at least once a year in the filter element replacement is recommended.

Activated carbon filters, the filters used for dust and grease from the later, much lower levels in the amount of oil to be used to remove odors and hydrocarbons. Compressed air temperature 20 ° C in case of these filters after the amount of remaining oil will be around 0003 ppm.