Compressed Air Safety Measures

1.1 Personal Protective Equipment
Company officials, the machine used and the personnel to take all safety measures to comply with all protection standards must be sensitive and careful.

The extractor of 2.1 PRESSURE
A. Air compressor and air tank outlet pipe mounted between the valve must be one. Repair of all kinds, and similar situations in the air without emptying the tank just closing the valve, have the security to save time.
B. Appropriate device for your compressor work more efficiently, air hoses, pipes and filters, select it. All of the selected device and the pressure of the compressor capacity to be absolutely sure that you comply.
C. All compressed air connections, a good way to avoid accidental opening check was done.
D. Any fittings, hoses, valves or filters such as the link to remove all the internal pressure of an element empty. Then turn off the compressor before the pressure tank is empty (the gauge in the 0 value) appears. Lead to any side and to avoid injury, turn off the compressor oil in the tank to reduce foam wait. Separator tank when pressure in the oil plug removal in case of any element or hot oil flushing and pressure can cause injury to the note.
E. The direct output of compressed air at any point away from people and creatures. Do not live on humans and compressed air. Do not breathe the air compressor produces.
F. Order to avoid serious accidents and injuries do not joke with the air hose.
G. Safety and the safety valve pressostatı Do not try to change the factory settings.

1.3 Fire and Explosion
A. In and around the compressor oil or any combustible materials immediately clear when you see the pond.
B. Compressor off and let it cool. Later, sparks, flame or other fire will form, and eliminate the causes of this around, doing absolutely do not allow smoking.
C. Sound insulation on oil, on the outer surface of the compressor, or certainly do not let the accumulate in the cabin. If necessary, this will clean up debris from an appropriate cleaning supplies. If necessary, remove the foam sound insulation and replace it. In the process of cleaning Do not use combustible materials.
D. If the repair, cleaning or definitely going to take any action in the cabin of the compressor to cut energy.
E. Keep electrical and pressure connections in good condition. A cable insulation, broken or disconnected immediately. All electrical and pressure connections on a regular basis and keep clean.
F. Grounded or conductive materials, to avoid causing a fire, over which parts of the reach of electricity.
G. Affected if the resources are going to sound insulation from heat and remove the sponge to remove such materials.
H. Running smoothly and is full of fire extinguishers to keep in constant close to the compressor.
I. All have been in contact with the oil glands or keep away from the garbage compressor.
J. In the absence of a proper flow of cooling air compressors run absolutely.
K. If any hazardous environmental conditions suitable for the compressor and it certainly has not been manufactured specifically to operate the compressor.

4.1 PARTS MOVE
A. Hands, arms, and clothes away from moving parts of machine tools.
B. Running compressors, fans, belts and other moving parts as possible to avoid being caught away.
C. In the vicinity of the compressor and hot and moving parts, especially as far as possible the closer you wear the clothes fit you and your hair is longer to collect.
D. If you are not making any adjustments or repairs, keep the lids closed.
E. Compressor running all the staff, flushed, and the launch of explosion may cause damage to protect the compressor tool.
F. Before you start a repair or adjustment of any other accident of the compressor for the compressor working separate electrical connection from the power supply.
Compressors are controlled remotely, in this case, warning signs and labels printed on the compressor is certainly very important.
G. Hands, feet and walk the hallways, especially from oil and keep away from water that result in any event be given a slip or fall.
H. Where the compressor is run to ensure adequate lighting.

1.5 HOT SURFACES, sharp edges and corners
A. Hot surfaces, hot oil, sharp edges and corners to avoid contact with.
B. Air exhaust away from your body from all points.
C. If you are working on a compressor, such as gloves and other protective clothing topics.
D. One first aid kit handy. Call your doctor if any injuries. Infection can cause small abrasions and burns, do not ignore.

1.6 of toxins and irritants
A. Do not breathe the air from the compressor.

DANGER!
As pressure to breathe air directly can cause serious injury or even death.

B. As the direct provider of compressed air breathing apparatus, and certainly do not use these lines. Also coming from that device on or off the air for rooms without air evacuation definitely not.
C. With only enough air compressor to run in sections.
D. Compressor, the air intake of corrosive, toxic or steam away from media outlets that place a lot.
E. Compressor oil is typically used in an industrial oil. Avoid body contact with this oil. If such an event occurs when the oil region of contact wash with soap and water. For information about filling your compressor oil lubrication in this guide, see section.

Of 1.7 SHOCK
A. Compressors in these instructions and guidelines should be installed in compliance with all standards. The electrical connection is required to process a qualified electrician.
B. All body parts, hand tools, and conductive material, over the last pieces of the reach of electricity. The electrical parts on the machine if a repair or tune your feet wet and not pay attention to on an insulating substance. All repair procedures and setting up one-handed and right-handed as possible in case of electric shock, do it any way electricity flows through the heart get reduced possibility.
C. Repair process, dry, clean, well lit and have good ventilation in the media do.
D Compressor Keep your electric cabinet door always closed. If you need to open the main switch by stopping the compressor from the compressor to cut energy.
E. Before touching any ungrounded conductors or electrical equipment before making an adjustment to the final energy of the compressor.
F. Before the first run after installation, carefully check all the devices.

1.8 LIFTING AND HANDLING
A. By forklift to remove the compressor, if possible, but it is not possible with as follows: remove the strap as shown.
B. Necessary before removal of the source point and whether or not a problem that may have loosened the nuts and screws to review.
C. Will use to remove all devices, and support is in good condition and capable of bearing the weight of the compressor to be sure. If you are not sure of the weight of the compressor, and then weighed before the compressor to start the removal process.
D. When you remove the compressor to act very carefully to prevent damage to care.
E. When you remove the compressor stop anyone from getting into the machine under.
F. Do not remove the extra compressor.
G. Removal of the person making the compressor while hanging them to the compressor.
H. Location to place compressor stability could be carrying the weight of the compressor make sure.
I. Compressor before removing the forklift feet make sure it is a very good set.
J. Be careful not to remove the extra forklift machine and get very slow and careful movements.
K. Before you remove the compressor and the compressor pallet forklift pallet to make sure it is firmly mounted. Connection is made or broken fins mounted properly certainly do not remove the compressor, otherwise the result is serious injury or accident.

1.9 IMPORTANT ISSUES
A. If the compressor into the people have access to large, and the machine in any other action they're doing this event and other staff inform and machine door open hold, so that the staff accidentally machine to run and in running injured Avoid.
B. Before closing the cover of the compressor in the machine is not one of the country.
C. After any repair or adjustment of parts in the machine, cleaning agents, or ensure that the meter does not stay.
D. After any repairs or adjustments have plugged all of their housing.
E. Friction contact with moving parts from getting into any place.
F. Do not carry electricity cables exposed.