Cooling Type Compressed Air Dryers

  This method refrigerators or air conditioning equipment in a way similar to the compressed air after cooling to room temperature in the condensing of moisture re-pressurized air to be heated to a temperature close to be defined. This type of freon as a refrigerant in the gas dryer is used for Also known as freonlu dryer.

   In terms of controlling the operation of dryers, refrigerated type dryer is collected in two groups. One thermal mass dryers, and one from the expansion bay are drier. In both types of compressed air dryers and freon circuit to circuit, there are two separate circuits. Freon refrigerant gas compressed in the circuit or the continuous operation of the compressor to operate at run-way stop will vary.

   Refrigerated dryers in all types of cooling process is done in the same way. Talking about two separate circuits in this dryer edilebilir.Bunlar, circuit and circuit compressed air is a gas.

    Type of operating system is cooled in the dryer is also called ekovat starts with freon compressor. Here, after being compressed gaseous freon, the liquid cooled condenser expenditure was made. Freon gas is higher when the cooling capacity of liquid. Filter and filter the liquid refrigerant pressure freonun expansion be lowered. In the meantime, not only pressure drop, absorption at the same time. The freon cooling, while it is still liquid. Cold and liquid freon, coolant / air temperature change and here comes of moisture in the compressed air cooled yoğuşmasına causes. During this process, compressed air is passed through the heat and liquid-gas mixture freona occurs. From here the liquid-gaseous refrigerant separatörüne decomposition the freon, alone to protect the compressor in the gaseous freonun komp - Resor to go is provided.

   Freon gas is cooled with compressed air in the water as steam and water separator with a separation focuses is emptied. Later, Before leaving the cooled compressed air dryers, air / air heat exchanger in the hot compressed air from the compressor are compared with. Thus, pre-cooling the compressed air entering the dryer is done, To exit from the dryer and the temperature is brought close to room temperature air. Thus, After the dryer, compressed air lines is driving condensation is prevented.